Fisher P7 - Before Using; Main Features

Congratulations! You have selected a fine audio system, and you can
look forward to many pleasant hours of listening with this Fisher P7
audio component system.
@
—
Read
these
operating
instructions
carefully
before
using
the
sys-
tem.
@ After reading, store these instructions in a safe place for future
reference. :
Before Using
Using a screwdriver, turn the fixing screw on the bottom panel of the
CD player approximately 1/4 turn clockwise (Fig. 1).
Before transporting the CD player, always turn the fixing screw 1/4 turn
counterclockwise to secure the pickup mechanism.
Fig. 1
a) Bottom panel of CD player
b) Approx. 1/4 turn
c) Fixing screw
Genera! Information
This manual is designed to provide all the necessary information and
instructions for successful operation of your FISHER audio system. If
you are installing the system yourself, please pay careful attention to
the separate Connections Manual when making connections.
This system has been adjusted for use with an AC 220V, 50Hz power
supply.
Your FISHER audio system is designed to be insensitive to temperature
and voltage changes under normal conditions. For longer service life
and operating safety, it should not be placed near sources of extreme
heat (close to heating units, radiators, or in direct sunlight), or areas
of high humidity or moisture. Voltage fluctuations greater than + 10%
can lead to mechanical failure of the unit. If you have questions on
these points, please ask your FISHER dealer for further information.
Copyright Warning:
Recording copyright material without permission of the cop-
yright owners is usually an infringement. If you wish to re-
record copyright material, permission from the copyright
owner is necessary. FISHER does not approve of, and cannot
be
held
responsible
for,
any
unlawful
use
of
this
machine.
Main Features
Multi-function CD Player
(compatible with 8cm and 12cm CDs)
Programmed playback for up to 20 tracks
Direct search and index search
Skip playback
Forward and reverse search
Repeat playback of a single track or entire disc
Editing function for automatically selecting tracks for recording
onto tapes of a specific length
Auto
space
function
for
creating
5-second
blank
spaces
between
tracks
Concentrated
display
for
checking
times,
operating
modes,
etc.,
at
a
glance
Linear motor drive mechanism for high speed access
Digital Timer
@ Unattended recording timer
@ Wake-up timer
@ Sjieep timer
Remote Control
@ For easy operation from a distance
CD Direct Function
® Compact disc signals are sent directly to the power amplifier
Twin Seven-Band Equalizers
@ One or two sources can be recorded simultaneously with different
equalizer patterns onto the CR-WP7 cassette deck. You can also
record with one equalizer pattern while playing with a different
equalizer pattern.
@ Five equalizer patterns have been preset in the memory (POPS,
VOCAL, FUSION, DISCO and ROCK).
@ Five other patterns can be created and stored in the memory for
use with different types of music.
@ The patterns can be reversed and the sound can be made flat at
the touch of a button.
Fig. 3
a) CD
b) Graphic Equalizer 1
c) Graphic Equalizer 2
d) Deck 1
e) Deck 2
f) ACDcan be recorded onto two tapes simuttaneously with different
graphic equalizer settings.
Fig. 4
a) Record
b) CD
c) Graphic Equalizer 1
d) Graphic Equalizer 2
e) Deck 1
f) Deck 2
g) Arecord and a CD can be recorded onto two tapes simultaneously
with different graphic equalizer settings.
Fig. 5
a) Record
b) CD
c) Graphic Equalizer 1
d) Graphic Equalizer 2
e) To amplifier
f) Deck 1
g) Deck 2
h) A record can be played with one graphic equalizer setting while
recording a CD, etc., with another graphic equalizer setting.
Independent Recording/Playback Decks With Auto
Reverse and FCRS
@ Auto reverse playback and recording eliminates the need to turn
over the cassette.
@ FCRS (Full Auto Computer Recording System) for quick and easy
CD recording, auto edited recording, dubbing (normal and high
speeds), tuner recording, and auto space recording.
@ Simultaneous recording of two sources and cross Dolby recording
@ Playback and recording with graphic equalizer effect :
Cross Dolby Recording
With this function, tapes can be dubbed (at normal speed) in any Dolby
mode (B, C or off), regardless of the mode in which the original tape
was recorded. (The DOLBY NR switch does not function during high
speed dubbing.)
Fig. 6
a) Deck 1
b) Dolby C
c) Dolby B
d) Dolby off
e) Dolby C
f) Dolby B
g) Dolby off
h) Deck 2
* Dolby noise reduction manufactured under license from Dolby Labo-
ratories Licensing Corporation.
“DOLBY” and the double-D symboi (D0) are trademarks of Dolby La-
boratories Licensing Corporation.
Accessories
Remote control unit (1)
Remote control cords (4)
Audio cords (9)
indoor FM antenna (1)
Antenna holder (1)