16
Restore Factory Defaults
1. Unplug the guitar and move the tone controls to the center detent position.
2. Press and hold the Tuner and Anti-Feedback buttons simultaneously.
3. Plug in the guitar. Continue to hold the Tuner/Anti-Feedbackbuttons for three
seconds after you plug in.
4. Release the Tuner/Measure buttons then unplug the guitar to complete
the procedure.
Defaults:
• EQ for all four Images reverts to fl at.
• Relative Phase settings return to default state.
• Anti-Feedback frequency is reset to 100Hz.
To Next Page
Loading...
