Need help?Do you have a question about the Fishman Aura Jerry Douglas Signature Series and is the answer not in the manual?
General| Type | Acoustic Imaging Pedal |
|---|---|
| Technology | Aura Acoustic Imaging |
| Presets | 16 |
| Inputs | 1 x 1/4" (instrument) |
| Effects | Reverb |
| Current Draw | 100 mA |
| Weight | 1.5 lbs |
| EQ | 3-band EQ |
| Power Supply | 9V DC |
| Controls | Volume, Blend, EQ, Reverb |
| Outputs | 1 x 1/4" (balanced), 1 x XLR (balanced) |
Jerry Douglas shares his vision for the Aura pedal as a solution for realistic amplified acoustic sound.
Paul Beard highlights the resolution achieved with the Nashville Series pickup and Aura pedal for resophonic guitars.
Bil VornDick discusses creating Aura Images using vintage microphones and discreet preamps for accurate sonic representations.
Connect the output to your amplifier, mixer, effects devices, or an unbalanced input on a recording system.
Refers to the power input for a 9V adapter.
Connect your guitar here with a standard instrument cable, especially passive pickups.
Optimize input level by adjusting trim so the clip/batt LED flashes occasionally.
Use to improve bass response at low volume or control feedback at high volume.
Set volume high without clipping; reduce if distortion occurs.
Try all 16 Images to find ones that compliment your playing style and sound.
Adjust blend knob for a 50/50 mix, full Image, or full pickup.
Step on the footswitch to bypass the Aura effect; the guitar signal remains buffered.
Set up the footswitch to alternate between Image blend and muted output.
To Next Page
