18
Specifi cations
Digital signal path:
A/D, D/A conversion: 24-bit
Signal processing: 32-bit
Power supply: 9V alkaline battery or 9VDC adapter
Typical in-use current consumption: 18mA
Typical 9V alkaline battery life: 27 hours
9V adapter: Fishman 910-R
(
for 110V
)
or suitable fi ltered and regulated,
200mA type, tip = negative
Input impedance: 10M Ohm
Nominal output impedance: 3.5k Ohm
Input trim gain range: -10dB to +2dB
Maximum output level (onset of clipping): +2.4dBV
Baseline noise: -92dBV
(
A-weighted
)
Dynamic range: 94dB
(
A-weighted
)
Phase switch: Left position = non-inverting
All specifi cations subject to change without notice.
To Next Page
Loading...
Need help?
General
