5
Play / Edit
F1 Aura operates in two modes: Play and Edit. Play is for selecting the most
frequently used controls while Edit gives you access to many more features.
Play
When you plug in, F1 Aura powers up into Play mode. In Play mode, Volume,
Blend and Phase can be adjusted. The chromatic Tuner and the automatic Anti-
Feedback circuit can also be activated.
Edit
Press and release the Edit knob to enter Edit mode; the tuner’s green in-tune
LED will light solid. Once in Edit, press the Edit knob repeatedly to step through
the parameters. Each parameter is displayed using a single letter to represent
its function (see page 15). Adjust its value by turning the Edit knob. A number is
displayed and the tuner’s sharp/fl at lights show positive or negative values.
Note: F1 Aura is programmable and automatically saves your settings.
To exit Edit and return to Play mode, wait 10 seconds for the display to go dark,
or press + hold the Edit knob for 2 seconds. You may also immediately exit by
simultaneously pressing both the Edit and Volume knobs.
To Next Page
Loading...
Need help?
General