9
While the Anti-Feedback control is very effective, it’s best if you spend some
time while setting up before a performance and catch any issues before you
begin to play. With some practice, you’ll fi nd you can also use it to “fi x” any
resonant notes that may stand out in a particular venue.
Using the automatic Anti-Feedback control:
1. Press + hold both Edit and Volume for 2 seconds. The tuner display will fl ash
a “1” to indicate it is searching for the fi rst feedback.
2. Turn up the Volume, then either dampen the strings while tapping the body or
play the troublesome note until the feedback begins. The fi lter will automatically
identify and eliminate the feedback. The “1” in the display will now light solid.
3. At this point, you may continue to turn up your Volume as in step 2 to identify
up to two more problematic resonances. Each is indicated via a fl ashing “2” or
“3” during the search, in turn lighting solid when the resonance has been
identifi ed.
4. You may press the Volume knob at any time to cancel the search. The circuit
will hold the notched frequenc(ies) in memory until the process is repeated.
To Next Page
Loading...
Need help?
General