Operation
Operation assumes installation and wiring as described in the installation guide.
Connect the Fluence equipped guitar to your amplifier with a ¼-inch instrument
cable. To conserve battery life, remove the instrument cable from the guitar when
the system is not in use. You can expect up to 250 hours from a typical alkaline
battery or optional rechargable battery pack.
Fluence pickup voicing is selected using a switch such as the included push-pull
pot. An installer can choose activation in either of the two switch positions (see
installation guide for more details.) Fishman Fluence pickups offer the
following two voices:
Voice 1 – Vintage Single-Coil (voicing switch open position)
Vintage tone and sparkle: voice 1 peak frequency – 4kHz
Voice 2 – Hot Texas Single-coil (voicing switch grounded position)
Fuller tone with increased output: voice 2 peak frequency – 3kHz
3 4
To Next Page
Loading...
