Fishman Isys - Isys T Quick Start Guide; Initial Control Setup; Connecting the Isys T Unit; Using the Tuner Function

4
Isys T Quick Start
1. Set the controls • Set volume off and the contour control to off (button
out).
2. Plug in • Connect the Isys T to an amplifi er or PA with a ¼-inch instrument
cable. The batt light will fl ash once quickly to indicate it has switched on.
3. Tune up • Press the tuner button. When it’s on, the tuner mutes the
signal. Press again to exit.
4. Turn up • Raise the volume and adjust the contour control to your liking.