EasyManuals Logo

Fishman PRESYS BLEND ONBOARD PREAMP User Manual

Fishman PRESYS BLEND ONBOARD PREAMP
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
Mic Blend • This control determines the balance between the internal micro-
phone and your pickup signal. Turn the control left of center for more pickup or
right of center for more microphone, enhancing the natural sound of your pickup
output. At high volume levels, mix in less microphone to prevent feedback.
Mic Trim A dedicated microphone volume is located on the side of the
preamp body. Set the mic blend knob to the center position and adjust the mic
trim with a small slotted screwdriver until the microphone and pickup levels are
balanced to your liking.
Tuner • Use the tuner lights as shown below to tune your instrument.
Battery • When the batt indicator lights steadily it is time to change the bat-
tery. To conserve power, unplug the instrument and turn off the tuner when not
in use. Replace the battery by fl ipping open the preamp body using the latch
located above the Fishman logo. Be sure to observe the correct polarity during
this installation.
“A” note
below pitch
“A” note
in tune
“A” note
above pitch
“A#” note
in tune

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fishman PRESYS BLEND ONBOARD PREAMP and is the answer not in the manual?

Fishman PRESYS BLEND ONBOARD PREAMP Specifications

General IconGeneral
BrandFishman
ModelPRESYS BLEND ONBOARD PREAMP
CategoryAmplifier
LanguageEnglish

Related product manuals