Fishman PRO-EQ User Guide

3
Quick Start
1. Place XLR Pre / Post switch to “post” position.
2. Adjust the Input Gain so that the Clip / Low Battery light barely flickers with strong playing.
3. For acoustic bass only: Set Phase switch to position that sounds best and suppresses feedback.
4. Set Compression and Depth to 10:00.
5. Set EQ and re-adjust Input Gain if necessary (Clip LED should barely flicker with strong playing).

Fishman PRO-EQ Specifications

General

Notch Filter	Yes
Phase Switch	Yes
Controls	Notch Filter, Phase
Inputs	1/4" Instrument
Outputs	1/4" Output
Power Supply	9V battery