Fishman SoloAmp - Technical Specifications; Amplifier and Speaker Specifications; Physical and Connectivity Specs

19
Technical Specifications
Channel 1 & 2 D.I. Out
Output Impedance 600 Ohm balanced
Phantom power tolerant, ground isolated
Channel 1 & 2 Effects Sends:
Output Impedance 2k Ohm
Output Level -10dBV Nominal
Channel 1 & 2 Effects Returns:
Input Impedance 20k Ohm
Input Voltage +3dBV (1.4Vrms max)
-10dBV Nominal
Sends and returns are compatible with battery operated effects
processors
Mix D.I. Out:
Output Impedance 600 Ohm balanced
Phantom power tolerant, ground isolated
Tuner Out:
Output Impedance 5k Ohm
Speaker System:
Woofer Six 4” patented dual-gap woofers with neodymium
magnet
Tweeter One 1” soft dome, neodymium magnet, ferrofluid
cooled
Tweeter Level Up to 6dB cut
Crossover 4kHz (Bi-amplified with active crossover)
Amplifier:
Woofer 200Watts
Tweeter 20Watts
Physical:
Dimensions 6.7” x 5.6” x 41.54” (16.92cm x 14.34cm x 105.5cm)
Weight 23 lbs (10.5 kg) without stand and carry bag
Ship Weight 43 lbs (19.5 kg)
Specifications and information in this manual subject to change without notice.