Fishman TONEDEQ | AFX - Technical Specifications

10
Technical Specifications
Input impedance: 10M Ohm
Input trim gain range: -6dB to +14dB
Nominal Output impedance: 1k Ohm, Amp Output
600 Ohm, D.I. Output
Maximum Output level: +8dBV (onset of clipping)
Baseline noise: -91dBV
(
A-weighted
)
Dynamic range: 97dB
(
A-weighted
)
Typical in-use current consumption: 37mA (62mA max.)
Typical 9V battery life: 12 hours using alkaline battery
18 hours using lithium battery)
9V adapter: Fishman 910-R
or suitable ltered and regulated,
200mA type, tip = negative
Tone Controls:
Low cut:
40Hz, 80Hz, 160Hz
Low control:
±14dB @ 100Hz
Mid control:
±12dB @ 700Hz, Q=1
High control:
±15dB @ 6.5kHz
Compressor:
Threshold:
Variable
Ratio:
2.3:1
Phase switch: Left position = non-inverting
Boost: Variable: +3dB to +9dB
Dimensions: 5.6” D x 9.5” W x 2.2” H
142mm D x 240.8mm W x 55mm H
Weight: 2.2lbs (1.0kg)
We reserve the right to change any of the the specications and information in
this manual without notice.