SYSTEM OPERATION - PROGRAM OR EDIT A SEQUENCE
..................................................................................................................................................................................................................................
Press and hold to edit this
sequence in this example.
EDIT / DELETE A STEP
EDIT / CHANGE / INSERT A STEP
To “Edit / Delete” a step, touch
the step and a pop up menu will
appear. Select “yes” to delete
the step or “No” to cancel.
1. To remove and replace
an incorrect insertion of a
Light/step,first create a new
step of the correct Light,
adjacent to the light that you
wish to remove or edit.
Once this is done move to
the next part of the edit
process.
2. Touch an hold the Light/-
step that you would like
removed. A pop up menu
appears, select “Yes” and
the step will be removed
and replaced with the new
step executed in the first
step above.
Example of changing step 1 from Light #1 to Light # 6
1
2
SYSTEM OPERATION - PROGRAM OR EDIT A SEQUENCE
31
To Next Page
Loading...