FITLIGHT Trainer - Explanation of Parameters

SYSTEM OPERATION - RUN PROGRAMMED SEQUENCE
..................................................................................................................................................................................................................................
1
2
3
6
5
4
1. Repeats: This will repeat the sequence based on the number of times requested.
2. Start by Light: This will start the sequence when the flashing Light is deactivated.
3. Singular: This will select one Light in a row of Lights. This option is used when there are more than 2
Lights in a row.
4. Global Delay: This enables the system to follow the users hit rate, as the user speeds up so does the
triggering of the lights. The Lights are paced to the rate at which they are being hit.
5. Save Data: This will save the data when the sequence has completed.
6. Random Start: This will start the sequence at a random point in the sequence.
EXPLANATION OF PARAMETERS
SYSTEM OPERATION - RUN PROGRAMMED SEQUENCE
35