Flama 4585FL - Cleaning and Maintenance; Protecting the Environment

16 www.ama.pt
TIMES AND TEMPERATURES
Plate to use Standard display
Temperature
interval
Time interval
Upper and lower
plate
230°C 05:00 80°C-230°C 0.5 - 60 minutes
Upper plate 200°C 10:00 80°C-220°C 0.5 - 60 minutes
Lower plate 200°C 10:00 80°C-220°C 0.5 - 60 minutes
ANOMALIES AND REPAIR
In case of malfuncon, please take the
appliance to an authorized Technical
Assistance Service. Do not aempt to
disassemble or repair the appliance, as this
may be dangerous.
PROTECTING THE ENVIRONMENT
This symbol indicates the
separate collecon of electrical
and electronic equipment.
The main objecve of the
separate collecon of this
waste is to reduce the quanty
to be disposed of, promote re-
use, recycling and other forms of recovery
in order to reduce its negave eects on
the environment.
When it is no longer in use, this appliance
must not be disposed of together with
other unsorted municipal waste.
The user is responsible for delivering it
free of charge to the selecve collecon
facilies available for that purpose.
Pieces of equipment that are no longer in
use can also be taken back at points of sale,
by purchasing new pieces of equipment
that are equivalent and have the same
funcons.
For more detailed informaon on collecon
points, please contact your City Council or a
point of sale for this equipment.
CLEANING AND MAINTENANCE
Whenever the appliance is not in use
and before performing cleaning and
maintenance, disconnect the plug from the
power outlet.
Before cleaning the appliance, allow it to
cool down for about 30 minutes.
Use a wood or silicone scraping tool to
remove residue from the plates. Do not
use tools that can damage the non-sck
coang.
Empty the soaker tray once it has cooled
down.
Press the plate release buon to remove
it from the appliance. Make sure that the
plate has cooled down completely before
handling it.
Aer removing the plates, you can wash
them in warm soapy water or in the
dishwasher.
Remove the soaker tray from the back of
the appliance and wash it with warm soapy
water. Let it dry before inserng it again in
the appliance.
The plates and the soaker tray can be
washed in the dishwasher.
Note - before removing the soaker tray,
make sure that the temperature of the
waste is low, otherwise it can cause burns.