EasyManua.ls Logo

Flama 5500FL - General Information

Flama 5500FL
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
English
DESCRIPTION
1. Main body
2. Water tank
3. Water tank handle
4. Filling hole
5. Iron
6. Temperature buon
7. Temperature indicator
8. Steam buon
9. Base of the iron
10. Cleaning indicator buon
11. Cable organiser clip
12. Thermal insulaon xture
GENERAL INFORMATION
CAUTION
During operaon or aer ironing,
never place the hot base on
anything other than the thermal
insulaon xture.
Filling hole
Fill the water tank with water through the
lling hole. Make sure that the water does
not exceed the maximum level indicated
on the water tank. Use the tank handle to
handle the tank.
Temperature buon
Turn the temperature buon to set the
ironing temperature based on the fabrics to
be ironed.
Min – Minimum temperature posion.
Indicated for synthec fabrics and silk
(70 °C<T<120 °C).
•• – Indicated for wool (100 °C<T<160 °C)
••• Indicated for coon (140 °C<T<210 °C)
Max Maximum temperature posion
Indicated for linen (170°C<T<230°C).
Temperature indicator
When the appliance is plugged in, the
temperature indicator light switches on.
As soon as the iron reaches the selected
temperature, the light switches o. The
temperature indicator light switches on and
o during the iron’s operaon, indicang
that it is working properly.
Steam buon
When the appliance has heated up to the
selected temperature and the temperature
indicator switches o, gently press the
steam buon and steam will be sprayed
from the base of the iron.
Release the steam buon for dry ironing,
without steam.
Cleaning indicator buon
The appliance should be cleaned when the
cleaning buon light switches on.
Before cleaning, prepare a container
with capacity above 300ml to collect the
wastewater; then, place the iron inside
the container and place the container on a
stable surface. An empty kitchen worktop
can also be used instead of a container.
For more thorough cleaning of the circuit,
check that the temperature buon is in
the “Max posion before acvang the
cleaning funcon.
NOTE: The cleaning might not be as good
or might not be carried out is in a posion

Related product manuals