Flame boss 500 - WiFi Setup; WiFi Setup Using Mobile Apps

19
www.FlameBoss.com
Entering Your Password:
The controller will display this WiFi Status indicating the
controller is in Access Point mode.
The numbers, #####, following the FB- is the controller’s
device ID.
Ex: FB-32270 (This is the SSID and 32270 is the device ID)
WIFI SETUP USING MOBILE APPS
To set your controller in Access Point Mode, follow the screens below:
q or p toggles between Station and Access Point mode.
Select Access Point mode and press NEXT.
* Refer to page 13 for instructions to download iOS or Android mobile app.
1. Using the mobile app, create a MyFlameBoss.com account and log in.
2. Once logged in, tap on the Controllers tab (2nd tab from the left) on the
bottom of the app.
3. At the top of the Controllers tab, click the Add link and follow the steps shown.
WiFi Status
AP Mode
SSID: FB-#####
WiFi Mode
[Access Point]