FLAMIC S.R.L. 5 Via dell’Artigianato, 36035 Marano Vicentino (Vicenza) - Italy
8
Dough sheeter SF450 - SF500 - SF600 Operation and maintenance manual (translation of original instructions) – Ed. 10/2016
Rev.02 10/2017
All rights reserved. Reproduction in whole or in part of this manual is prohibited.
WARNING: very important information regarding health and safety
IMPORTANT: important information regarding the use and care of the machine
1.5 VALIDITY OF THE CE MARKING AND EC DECLARATION OF CONFORMITY
In this manual, all references and/or information regarding:
• CE marking
• EC declaration(s) of conformity
• declaration(s) of incorporation of partly completed machinery
• directives and regulations issued by the institutional bodies of the European Union (Parliament, Council,
Commission etc.) and related acts of transposition of the EU Member States
• harmonised European standards (EN)
are to be considered valid only for the machines intended for sale in the European Union or for which
compliance with laws, directives etc. issued by the European Union has been specifically requested by the
customer and formally accepted by Flamic s.r.l.
For all the machines that are not intended for use in the European Community, with the exceptions mentioned
above, these references and indications should be considered to be totally meaningless and of no value.
To Next Page
Loading...
