PowerFLARM Core Manual v.150 International
Conformity Declaration
FLARM Technology GmbH, Lindenstrasse 4,
CH-6340 Baar, Switzerland, declares that the
product PowerFLARM Collision Warning Device
in Hardware Version FLAPFC1*E and typical
configuration, meets the requirements of the
CE mark.
The communications conformity meets the
requirements of EN 300 220 (power class 9),
EMC- Conformity EN 301 489 (class 3 SRD-
Device, equipment type I). The device is in ac-
cord with the requirements of the European
R&TTE Directive.
This device complies with Part 15 of the FCC.
Operation is subject to the following two condi-
tions: (1) this device may not cause harmful
interference, and (2) this device must accept
any interference received, including interfer-
ence that may cause undesired operation.
Within the USA, the device may only be used in
transportation vehicles such as aircraft or mo-
tor vehicles.
This Class A digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe A est con-
forme à la norme NMB-003 du Canada.
ZKUGC625162
10154A-FLAPFC10
To Next Page
Loading...