Flash ART Series User Manual

www.ash-butrym.pl
10
STROBE BEAM
AURA
AURA
FIXTURE MODE
FUNCTION
DMX
VALUE
DETAILS
14 23 68
5-NET
(ARTNET ONLy)
* 22 * * aUra BackgroUnd green
BackgroUnd green
intensity
* 23 * * aUra BackgroUnd BlUe
BackgroUnd BlUe inten-
sity
*
21
22
23
(1)
(2)
(3)
aUra pixel 1 red
aUra pixel 1 green
aUra pixel 1 BlUe
0-255
0-255
0-255
aUra single pixel control
*
24
25
26
(4)
(5)
(6)
aUra pixel 2 red
aUra pixel 2 green
aUra pixel 2 BlUe
* ... ...
*
54
55
56
(34)
(35)
(36)
aUra pixel 12 red
aUra pixel 12 green
aUra pixel 12 BlUe
* 57 ((1)) stroBe Beam pixel 1
stroBe Beam single pixel
control
* 58 ((2)) stroBe Beam pixel 2
* ... ...
* 68 ((12)) stroBe Beam pixel 12
5-net mode works only with art-net protocol, and only with connection thrU rJ-45 caBle
yoU have to set ip adress, sUBnet mask, Universes to recive signal
control - there is tilt, master Beam dimmer, master aUra dimmer, reset
led - pixel mapping Beam and aUra
attention artnet coUnts Universes from 0
to patch it correctly, yoU need to occUpy 3 Universes. one for main control, where the address set in
the device applies. the other two are Universe led x and x+1. the address for pixel mapping always
starts with 1.
ex. yoU set main control on Universe 4, address 201, led on Universe 10, so... yoU have to patch
console control at Universe 5.201, Beam at Universe 10.1, and aUra at Universe 11.1

Flash ART Series Specifications

General

Brand	Flash
Model	ART Series
Category	Lighting Equipment
Language	English