Page 14 of 24
Cleaning the M1
If the body of the M1 needs to be cleaned, gently wipe the surfaces with a soft cloth dampened with a
mild detergent or a 10% bleach/90% water solution (household bleach [containing less than 10% sodium
hypochlorite]).
• Do not sterilize, autoclave, or immerse the M1 in liquid of any kind. Do not pour or spray any
liquids onto the M1. Do not sterilize with EtO.
• Do not use caustic or abrasive cleaning agents on the M1. Do not use cleaning agents containing
ammonium chloride or isopropyl alcohol.
Nonin 8000AA Articulated Sensor Specifications
To Next Page
Loading...