EasyManua.ls Logo

Flavel Renoir FRECN0EN User Manual

Flavel Renoir FRECN0EN
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
,
RENOIR
BATTERY IGNITION RADIANT CONVECTOR GAS
FIRE
Installation, Maintenance & User Instructions
Hand these instructions to the user
Model No’s FRECN0EN & FRECR0EN are for use on Natural Gas
(G20) at a supply pressure of 20 mbar in G.B. / I.E.
Question and Answer IconNeed help?

Do you have a question about the Flavel Renoir FRECN0EN and is the answer not in the manual?

Flavel Renoir FRECN0EN Specifications

General IconGeneral
BrandFlavel
ModelRenoir FRECN0EN
CategoryIndoor Fireplace
LanguageEnglish

Summary

Appliance Data

Technical Specifications

Details on gas input, pressure, ignition, dimensions, and connection.

Efficiency Declaration

Statement of the appliance's energy efficiency rating.

Installation Instructions

Conditions of Installation

Legal and regulatory requirements for installation in GB and IE.

Flue and Chimney Suitability

Requirements for flue types and minimum dimensions.

Fireplace and Surround Suitability

Guidelines for hearth and surround materials and placement.

Clearance and Shelf Placement

Specifies minimum clearances and shelf positioning rules.

Chimney Inspection and Closure Plate

Procedures for inspecting chimneys and fitting the closure plate.

Flue Box and Pre-Cast Fitting

Instructions for connecting to prefabricated flue boxes and pre-cast flues.

Hearth Fitting and Spillage Monitoring

Hearth requirements and details on the spillage monitoring system.

Fire Installation Steps

Packing Check List

List of items included with the fire.

Preparation and Glass Panel Removal

Steps to prepare the fire for installation, including removing the glass panel.

Closure Plate Installation

How to fit the closure plate and test chimney draft.

Flue Spigot and Gas Connection

Connecting the flue spigot and making the gas supply connection.

Battery Installation and Gas Tightness Test

Installing the battery and verifying gas tightness.

Operation and Commissioning

Fuelbed Assembly

Detailed instructions for positioning coal forms on the fuelbed base.

Lighting the Appliance

Step-by-step guide to safely lighting the fire's pilot and main burner.

Combustion Product Clearance Test

Procedure for testing flue gas draw using a smoke match.

Final Checks and Handover

Post-installation checks and instructions for the user.

Servicing and Maintenance Instructions

Servicing Notes and General Access

Guidelines for annual servicing and how to access components.

Removing Burner Assembly

Steps to remove the burner assembly from the firebox.

Removing Control Tap and Microswitch

Procedures for disconnecting the control tap and microswitch.

Removing ODS-Pilot Assembly

Steps for removing the Oxygen Depletion System pilot assembly.

User Instructions

User Conditions of Installation

User-facing information on installation requirements and safety.

Operating the Fire

Instructions on using the appliance, including lighting and heat settings.

Fuelbed Assembly (User Guide)

User-specific instructions for assembling the fuelbed.

Battery Replacement (User Guide)

Guide for users to replace the battery.

Related product manuals