6915 TURN-CONTROL
Turntable Controller
Operating instructions
Contents Page
1. Safety Warnings and Advice on Use 26
1.2. Components, operational elements and
connections 27
2. Operation 29
2.1 Connection to the Layout 29
2.2 Connection to a transformer 31
2.3 Operation and Menu Options 32
2.4 Using the controller 36
2.5 Play mode 40
2.6 Special Functions 42
3. Digital Operation 46
4. Appendix 48
Dear Railway Modeller,
Thank you for deciding to purchase the TURN-
CONTROL turntable controller 6915 from
FLEISCHMANN. The controller can be used for
any of the FLEISCHMANN turntables (as well as
Märklin* 7286) either in DC powered or digital
systems and even in 3-rail AC layouts, so that you
can pre-select your desired turntable exit tracks
and automatically rotate the turntable to them.
The TURN-CONTROL can even be operated by
DCC equipment or via LocoNet connections.
You won’t need to make any alterations either to
the layout or directly to the turntable itself.
In this operational manual, we will describe, step
by step, all you need to know about how to install
and how to use, (i.e. connection to additional
turntables) the TURN-CONTROL controller on
your layout.
The FLEISCHMANN-Team wish you many hours
of enjoyment with your new controller.
* Märklin is a registered trademark of the Company of Gebr. Märklin&Cie GmbH, Göppingen
25
GB
To Next Page
Need help?
General
