FLEX ADM 60
12
For your safety
Intended use
This measuring instrument is designed
for commercial use in industry and trade.
The laser range finder is designed for measu-
ring lengths, heights and distances as well as
for determining distances, areas and volumes.
Safety instructions
WARNING!
Read all safety instructions and other instruc-
tions to be able to work safely and securely
with the measuring instrument.
Keep all safety instructions and other instruc-
tions in a safe place for the future.
– Do not point the laser beam at people or
animals and do not look into the laser beam.
This measuring instrument generates laser
radiation which may cause blindness.
– Have the measuring instrument repaired by
qualified technicians and with original spare
parts only. This ensures that the safety
of the measuring instrument is maintained.
– Do not let children use the measuring
instrument unsupervised.
They could accidentally blind people.
– Do not use the measuring instrument in
a potentially explosive environment which
contains flammable liquids, gases or dust.
The measuring instrument may generate
sparks which will ignite the dust or the
vapours.
– If devices other than the operating and
adjusting devices specified here are used
or if different procedures are implemented,
this may result in a hazardous exposure
to radiation.
– Do not disable any safety devices and
do not remove any information or warning
signs.
– Before switching on the device, check for
visible damage. Do not switch on damaged
devices.
– When using the measuring instrument
on ladders, avoid an abnormal body
posture. Ensure that you have a secure
footing and keep your balance at all times.
– If shipping the device or shutting it down
for a prolonged period, isolate the batteries
or take them out of the device.
To Next Page
Loading...
Need help?
General
