Flex GE MH 18.0-EC Original Operating Instructions

GE MH 18.0-EC
24
-Declaration of Conformity
We declare under our sole responsibility
that the product described under
“Instructions for use” conforms to the
following standards or normative
documents:
EN 60745 in accordance with the regu-
lations of the directives 2014/30/EU,
2006/42/EC, and 2011/65/EU.
Responsible for technical documents:
FLEX-Elektrowerkzeuge GmbH, R & D
Bahnhofstrasse 15, D-71711 Steinheim/Murr
13.11.2020
FLEX-Elektrowerkzeuge GmbH
Bahnhofstrasse 15, D - 71711 Steinheim/Murr
Exemption from liability
The manufacturer and his representative
are not liable for any damage and lost profit
due to interruption in business caused by
the product or by an unusable product.
The manufacturer and his representative
are not liable for any damage which was
caused by improper use of the power tool or
by use of the power tool with products from
other manufacturers.
Klaus Peter Weinper
Head of Quality
Department (QD)
Peter Lameli
Technical Head

Flex GE MH 18.0-EC Specifications

General

Brand	Flex
Model	GE MH 18.0-EC
Category	Sander
Language	English