Flex PE 150 18-EC - Technical Specifications

PE 150 18-EC
16
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working period.
For a precise estimation of the vibration load
the times should also be considered during
which the power tool is switched off or even
running, but not actually in use.
This may significantly decrease the
exposure level over the total working period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and the
accessories, keep the hands warm,
organisation of work patterns.
CAUTION!
Wear ear protection at a sound pressure
above 85 dB(A).
Technical specifications
* Start speed of acceleration function
PE 150 18-EC
Machine type Polisher
Nominal voltage V 18
allowed batteries Ah
AP 18/2.5
AP 18/5.0
AP 18/8.0
allowed chargers
CA 12/18
CA 18.0-LD
Tool holder M14
Tool Ø max. mm 160
No load speed r.p.m. (110)* 550 - 1750
Weight according to “EPTA Procedure 01/2003”
(without battery)
kg 2.1
Weight of battery
- AP 18/2.5
- AP 18/5.0
- AP 18/8.0
kg
0.42
0.72
1.06
Average battery life (depending on speed,
tool diameter, load ...)
- AP 18/2.5
- AP 18/5.0
- AP 18/8.0
min 12
24
38
allowed ambient temperature
- for the loading process
- for operation and storage
°C 4 ... 40
-10-40°C / < 50°C
A-weighted sound pressure level according to EN 62841 (see “Noise and vibration”):
Sound pressure level L
pA
dB(A) 72
Sound power level L
WA
dB(A) 83
Uncertainty K db 1.5
Total vibration value according to EN 62841 (see “Noise and vibration”):
Emission value a
h
when polishing painted surfaces
m/s
2
<2.5
Uncertainty K
m/s
2
1.5