Camera
Kite
User
Manual
29
Solo launch in light to moderate breeze (without the stabiliser
and camera or smartphone being installed on your kite)
• Put your kite on the ground with the bridle (‘Camera Kite’ printed side) facing down and with the
nose of your kite facing upwind.
• Install the reel support strap correctly across your left shoulder and under your right arm.
Ensure your reel is locked with the reel ratchet lock device (by twisting the rotary knob
clockwise to position ‘L’ as indicated on the reel)
Camera Kite Deployment
• Attach the kite line which is already installed on your kite line reel by opening up the clip
situated on the beginning of the kite line and affi x the clip to the metal bridle ring which is
attached to your kite, then close the clip again. (Important)
• Walk your kite downwind for at least 20 metres (65 feet) or more before you place your kite in
its launch position, the launch position has the nose of your kite facing downwind with the bridle
(‘Camera Kite’ printed side) facing up.
To Next Page
Loading...