Camera
Kite
User
Manual
17
Camera Kite Assembly
• Unpack your kite and spars from your rucksack.
• Assemble all ve free spars to full length.
• 2 x top spine spars (shortest of the ve spars)
• 2 x wingtip spars (longest of the ve spars)
• 1 x spreader spar
• Assemble the bottom spine spar which is already located in the bottom spine sleeves of the
kite with the red 90° attachment arm attached to the middle section of the bottom spine spar.
Ensure the bungee that goes through the red 90° attachment arm is located behind the spar,
towards the inside of your kite.
To Next Page
Loading...