Flexitron Webdyn WebdynModbus - Format of Alarms; Example of Alarm Files

contact@webdyn.com | webdyn.com
V1.0 subject to changes | Webdyn © by Flexitron Group
52
7.6.2 Format of Alarms
The uploaded CSV alarm le may contain several alarms from different sources. It complies with the
following format:
date-time_1;AlarmSource1;leDenitionName;deviceName;indexVariable,va
lue
date-time_N;AlarmSourceN;leDenitionNameN;deviceNameN;indexVariableN
,valueN
Where:
date-time_N: timestamp when the alarm was triggered, in format YY/MM/
DD-hh:mm:ss
AlarmSourceN: source of alarm triggering: here MODBUS.
leDenitionName_N: name of the denition le associated with the
triggering device.
deviceNameN: name of the triggering device.
indexVariableN: index of the variable raising this alarm.
valueN: value of the variable that raised this alarm.
7.6.3 Example of Alarm Files
The alarm le prexID_AL_130327_100305.csv.gz was received after a change in the status of inputs
input4 and input2 of the device Slave 1.
The le contains the following information:
27/03/13-10:01:16;MODBUS;prexID_MODBUS_TYPE1.ini;Slave 1;12;1
27/03/13-10:01:18;MODBUS;prexID_MODBUS_TYPE1.ini;Slave 1;10;0