Flexitron Webdyn WebdynModbus - Modem Information

contact@webdyn.com | webdyn.com
V1.0 subject to changes | Webdyn © by Flexitron Group
65
Example:
<0>Apr 04 13:27:10 Application: FTP send debug le OK: /LOG/
prexID_130404_132611_debug.log.gz
<0>Apr 04 14:26:16 Application: Firmware version: 2.05.10 Mar 25 2013
<0>Apr 04 14:26:16 Application: WAN connection opened
<0>Apr 04 14:26:17 Application: NTP synchronization OK
<0>Apr 04 14:26:17 Application: FTP send data le OK: /DATA/INV/
prexID_INV_1_1_130404_142614.csv.gz
<0>Apr 04 14:26:17 Application: FTP send data le OK: /DATA/TIC/
prexID_TIC_130404_142614.csv.gz
<0>Apr 04 14:26:18 Application: FTP send data le OK: /DATA/IO/prexID_
IO_130404_142614.csv.gz
10.2 Modem Information
It is advisable to examine the information from the modem to check that it is operating correctly.
This is done by going to the page “Control/Modem” of the built-in Web server.
The following page is displayed:
• Modem type: GPRS.
• Modem ID: IMEI number of the modem.
• SIM ID: ICCID number of the SIM card.
• SIM status: Status of the SIM card. The message may be:
• READY: The SIM card has been inserted and the PIN code is correct. The gateway is ready
to open a GPRS connection.
• SIM PIN: The SIM card is waiting for a PIN code.
• SIM PUK: The SIM card is waiting for a PUK code (after three unsuccessful attempts to
enter a PIN code).
• SIM ERROR: No SIM card has been inserted.
• Signal level: Quality of the GSM signal; range 1 to 31.