EasyManuals Logo

FlexRadio Systems FLEX-6400 User Manual

FlexRadio Systems FLEX-6400
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
FLEX-6400/FLEX-6600 Hardware Reference Manual
Page 43 of 45
Copyright 2018 FlexRadio Systems. All Rights Reserved.
Once satellites are acquired and the synchronization process has begun, the MSI will
change to a SHORT FLASHING BLUE to indicate “locking” mode.
Upon reaching full “locked mode, the MSI will go to SOLID BLUE. Once locked, the
GPSDO may re-synchronize occasionally due to satellite changes. A LONG FLASHING BLUE
will indicate this “hold phase”.
If GPS satellites are no longer visible, the GPSDO will enter “holdover” mode and the MSI
will indicate SOLID YELLOW. The radio will continue to be completely functional, but the
frequency accuracy could diminish to +/-2x10
-8
over time. The GPSDO is configured to
remain “powered” even when the radio is off. This maintains frequency accuracy of the
GPSDO. The MSI shows SOLID AMBER.
I - Initial GPS acquisition and synchronization can take up to 1 hour depending upon
antenna placement and your location on Earth. This is normal, and the radio is fully
functional during this process.
I - GPSDO self-installation is possible and is covered in a separate installation manual
included with the GPSDO OPTION KIT.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the FlexRadio Systems FLEX-6400 and is the answer not in the manual?

FlexRadio Systems FLEX-6400 Specifications

General IconGeneral
BrandFlexRadio Systems
ModelFLEX-6400
CategoryTransceiver
LanguageEnglish

Related product manuals