Flight Deck SC-6502 - Trouble Shooting

To Previous Page

@@@@@@@@e?

@@h?

@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e

@@@@@@@@

?@@

?@@@@@@@@

?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@

@@g

@@@@@@@@

Trouble Shooting

* Speed is not displayed.

• Check that the speed sensor and the main unit are

positioned correctly (distance and facing direction).

• Check that the positions of the speed sensor and

magnet are correct.

• Check that the main unit is fixed correctly to the

bracket.

* Display does not appear or is faint.

• Poor main unit contact, or battery is depleted. Replace

the main unit battery with a new one.

* Incorrect data is displayed.

• Press the A/C button to re -enter the data.

* Display is dark.

• This is because the main unit has become hot and has

been affected by long-term exposure to direct sunlight,

such as can occur during hot weather.

Store the main unit in a cool, shady place so that it can

cool down and return to normal.

* Data display movement is slow.

• The computer operating temperature range is –10°C to

50°C. Check that the temperature is not lower than

–10°C.

* Gear indicator (bar) does not display correctly.

• Lift up the plate spring that the sensor

is mounted on as shown

in the illustration.

Rubber sensor pad

Plate spring