6.2 FLIR A310
T638517;a1
The FLIR A310 camera offers an affordable and accurate temperature measurement
solution for anyone who needs to solve problems that need built in “smartness” such
as analysis, alarm functionality and autonomous communication using standard
protocols. The FLIR A310 camera also has all the necessary features and functions
to build distributed single- or multi-camera solutions utilizing standard Ethernet
hardware and software protocols.
The FLIR A310 camera also has built in support to connect to industrial control
equipment such as PLCs, and allows for sharing of analysis and alarm results and
simple control using the Ethernet/IP and Modbus TCP field bus protocol.
Key features:
■ Support for EthernetIP field bus protocol (analyse, alarm, and simple camera control)
■ Support for Modbus TCP field bus protocol (analyse, alarm, and simple camera
control)
■ Built-in extensive analysis functionality
■ Extensive alarm functionality, as a function of analysis and more
■ On schedule: file sending (FTP) or email (SMTP) of analysis results or images
■ On alarms: file sending (FTP) or email (SMTP) of analysis results or images
■ MPEG-4 streaming
■ PoE (Power over Ethernet)
■ Built-in web server
■ General purpose I/O
■ 100 Mbps Ethernet (100 m cable, wireless, fiber, etc.)
■ Synchronization through SNTP
■ Composite video output
■ Multi-camera utility software: IP Config Utility and IR Monitor included
■ Open and well-described TCP/IP protocol for control and set-up
■ 16-bit 320 ×240 images @ 7–8 Hz, radiometric
■ Lenses: 25° included, 15° and 45° optional
Publ. No. T559498 Rev. a461 – ENGLISH (EN) – August 19, 2010 9
6 – Overview of camera models
To Next Page
Loading...
