Need help?Do you have a question about the FLIR A6703 and is the answer not in the manual?
General| Resolution | 640 x 512 pixels |
|---|---|
| Frame Rate | 30 Hz |
| Pixel Pitch | 17 µm |
| Accuracy | ± 2 °C |
| Interface | GigE Vision |
| Power Requirements | 12 - 24 V DC |
| Storage Temperature | -40°C to +70°C |
| Dimensions | 100 mm x 100 mm x 100 mm |
| Field of View | Depends on lens |
Details the different models within the A6000 and A8500 series cameras.
Describes the development of A6000 and A8500 series cameras for commercial R&D.
Highlights core functionalities like GenICam compliance, linearity, and data formats.
Outlines the primary connections for the A858x camera, illustrated with a back panel diagram.
Explains how to connect the power supply and turn on the camera.
Details connecting the HD-SDI video output for monitoring purposes.
Describes viewing 14-bit digital video over Gigabit Ethernet using software.
Allows the user to configure the camera for desired operations across five sub-menus.
Covers settings like factory calibrations, integration time, frame rate, and lens control.
Details manual and auto focus controls for motorized lenses via the setup tab.
Introduces the complex Sync Settings menu for synchronizing the camera with other devices.
Determines which phase of frame generation (integration or readout) is synchronized.
Configures camera behavior when placed in triggered modes for image acquisition.
Provides controls for managing on-camera NUCs, stored in RAM and Flash memory.
Guides the user through the NUC Wizard to build a NUC table for presets.
Explains NUC as a process correcting pixel-to-pixel response differences in the detector array.
Describes the Two-Point Correction process requiring two uniform sources for gain and offset.
Explains methods for determining and correcting bad pixels within the NUC table.
Provides controls for optimizing the Analog video output, affecting HD-SDI.
Outlines acquisition modes and features for A858x and A6000 series cameras.
Details power consumption, cool-down time, and sensitivity for A858x and A6000 series cameras.
Lists power consumption, cool-down time, and sensitivity for the A858x model.
Lists power consumption, cool-down time, and sensitivity for A6000 series models.
Summarizes NUC types, source, bad pixel replacement, and performance for A858x and A6000 models.
Provides specifications for the detector/FPA for A858x and A6000 series cameras.
Provides instructions for cleaning the camera body, cables, accessories, and lenses.
Gives detailed recommendations and procedures for safely cleaning camera optics.
To Next Page
