Need help?Do you have a question about the FLIR A6000 Series and is the answer not in the manual?
General| Operating Temperature | -15°C to +50°C |
|---|---|
| Spectral Range | 7.5 µm |
| Accuracy | ±2°C or ±2% of reading |
| Power Requirements | PoE (Power over Ethernet) |
| Storage Temperature | -40°C to +70°C |
Lists items typically contained in the camera box, including accessories.
Describes the different models within the A6000 and A8500 series families.
Details the A6000 and A8500 series infrared camera systems and their technologies.
Highlights GEV/GenICam compliance, linearity, 14-bit data, windowing, presets, superframing.
Details the physical connections on the back panel of the A858x camera.
Explains how to connect the AC power supply and turn on the camera.
Describes connecting HD-SDI and GigE digital video outputs for monitoring.
Accesses main menu options and provides status information.
Configures general settings, sync, trigger, filter, and flag parameters.
Manages Non-Uniformity Corrections (NUCs), including loading and performing.
Provides controls for optimizing analog video output, including AGC.
Accesses digital, analog, and saturation settings for fine-tuning.
Details camera dimensions and explains status LED indicators.
Describes power input connectors and various lens mounting interfaces.
Covers Gigabit Ethernet, CoaXpress, HD-SDI, and AUX connector functions.
Explains the functionality of Sync In and Trigger In signals for synchronization.
Lists technical specifications for camera interfaces and video outputs.
Details windowing capacity, acquisition modes, performance, and general characteristics.
Covers detector/FPA details and non-uniformity correction specifications.
Provides instructions for cleaning the camera body, cables, accessories, and optics.
To Next Page
