FLIR A6000 Series - Trigger Mode

5 –Camera Controller
A6000 and A8500 Series User’s Manual 35
5.4.2.5 Trigger Mode
When the camera is placed in a triggered mode, the image stream will stop until the trigger is
received.
Trigger Modes
Free Run (No Trigger)
In free run the camera cycles through frames/sequences
continuously.
Trigger then free run
Upon receiving a trigger (external or software) the camera will
start to generate sequences continuously.
The Trigger Mode options are Free Run, Triggered Free Run, and Triggered Superframe:
The Trigger Source can be Internal, External, Software or Time: