FLIR A6000 Series - Sync Options

5 –Camera Controller
A6000 and A8500 Series User’s Manual 37
5.4.2.6 Sync Options
The Sync Options page allows the user to set delays, sync out reference, and polarities for the Sync
and Trigger In. The delays can be set individually for each preset.
Sync In
Delay
Allows for the user to set a delay (µsec) for the external sync. See
timing diagrams below.
Polarity
The sync is edge triggered. Allows for the camera to use the rising or
falling edge.
Trigger In
Delay
Allows for the user to set a delay (µsec) for the external trigger. See
timing diagrams below.
Polarity
Trigger is edge triggered. Allows for the camera to use the rising or
falling edge.