2 Disclaimers
2.1 Measurement accuracy
The specification of the temperature measurement accuracy is only applicable
when the FLIR C5 is correctly installed in the FLIR Cx5 case.
2.2 Quality assurance
The Quality Management System under which the FLIR C5 camera is developed
and manufactured has been certified in accordance with the ISO 9001 standard.
The Quality Management Systems under which the FLIR Cx5 case is manufac-
tured has been certified in accordance with the following standards;
• EN ISO/IEC 80079-34
• UKSI 2016:1107 Schedule 3A, Part 2
FLIR Systems is committed to a policy of continuous development; therefore we
reserve the right to make changes and improvements on any of the products
without prior notice.
2.3 Copyright
© 2022 FLIR Systems, Inc. All rights reserved worldwide. No parts of the soft-
ware including source code may be reproduced, transmitted, transcribed or
translated into any language or computer language in any form or by any means,
electronic, magnetic, optical, manual or otherwise, without the prior written per-
mission of FLIR Systems.
The documentation must not, in whole or part, be copied, photocopied, repro-
duced, translated or transmitted to any electronic medium or machine readable
form without prior consent, in writing, from FLIR Systems.
Names and marks appearing on the products herein are either registered trade-
marks or trademarks of FLIR Systems and/or its subsidiaries. All other trade-
marks, trade names or company names referenced herein are used for
identification only and are the property of their respective owners.
#T810609; r. AB/88437/88437; en-US 2
To Next Page
Loading...
Need help?
General
