EasyManuals Logo
Home>FLIR>Thermal cameras>C5 Series

FLIR C5 Series User Manual

FLIR C5 Series
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
Uploading images
10
You can set up the camera to upload images for storage online.
To enable upload of images, you need to connect the camera to a Wi-Fi network and pair
the camera with a FLIR Ignite account.
If automatic upload is enabled, new images will automatically be uploaded to your FLIR
Ignite account when the camera is connected to a Wi-Fi network. You can also upload
images manually.
10.1 Connecting to Wi-Fi
1. Tap the Settings button .
2. Tap Connections > Wi-Fi.
3. Make sure Wi-Fi is enabled by toggling the Wi-Fi switch.
When Wi-Fi is enabled, a list of the available networks is displayed.
4. In the list, tap one of the networks.
Note Password-protected networks are indicated with a padlock icon, and for these
you will need to enter a password the first time you connect to the network. After that
the camera will connect automatically to the network. To disable the automatic con-
nection, select the currently connected network and then select Forget network.
10.2 Pairing with FLIR Ignite
You can pair the camera as part of the initial setup of the camera. You can also pair the
camera at any time via the Settings menu.
To pair the camera via the Settings menu, do the following:
1. Make sure the camera is connected to a Wi-Fi network.
2. Tap the Settings button
.
3. Tap Accounts.
4. Tap Pair.
5. Use a computer or other device with internet access and follow the instructions on
the camera screen.
10.3 Automatic upload
You can set up the camera to automatically upload images to your FLIR Ignite account
when the camera is connected to the internet.
To enable automatic upload of images, do the following:
1. Tap the Settings button
.
2. Tap Save options & storage > Auto upload.
3. Enable/disable automatic upload by toggling the Auto upload switch.
10.4 Manual upload
You can manually upload images to your FLIR Ignite account when the camera is con-
nected to the internet.
10.4.1 Uploading an image
1. Make sure the camera is connected to a Wi-Fi network.
2. Tap the Gallery button
.
#T810539; r. AC/67331/67368; en-US
19

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the FLIR C5 Series and is the answer not in the manual?

FLIR C5 Series Specifications

General IconGeneral
BrandFLIR
ModelC5 Series
CategoryThermal cameras
LanguageEnglish

Related product manuals