Camera settings
13
When the camera is paired, the Accounts dialog box displays the following information:
• The FLIR Ignite account that the camera is paired with.
• The link to FLIR Ignite: https://ignite.flir.com
• The current storage capacity in your FLIR Ignite account.
13.6 Device settings
• Language, time & units: This submenu includes settings for a number of regional
parameters:
◦ Language.
◦ Date & time.
◦ Distance unit.
◦ Temperature unit.
• Screen brightness: The screen brightness slider is used to control the brightness of
the screen.
Note You can also control the screen brightness on the swipe-down menu. For more
information, see section 6.3.4 Swipe-down menu, page 10.
• Auto power off: This setting defines the period of inactivity before the camera enters
standby mode.
• Screen rotation: This setting defines if the orientation of the overlay graphics will
change according to how you hold the camera.
• Show temperature scale: This setting is used to show/hide the temperature scale.
• Update: This dialog box is used to check for updates and install new firmware ver-
sions. The camera must be connected to the internet. For more information, see 14
Updating the camera, page 29.
• Product improvement program: This setting is used to help FLIR improve your camera.
The camera can send anonymous information to FLIR about how it is used and, when
something does not work as intended, notify FLIR about it.
• Reset options: This submenu includes the following settings:
◦ Reset default camera mode...: This setting will affect the image mode, color palette,
measurement tools, and measurement parameters. Saved images will not be
affected.
◦ Reset device settings to factory default...: This setting will affect all camera settings,
including regional settings, Wi-Fi networks, and pairing with your FLIR Ignite ac-
count. Saved images will not be affected. The camera will be restarted and the
start-up wizard will appear again.
◦ Reset image counter...: This setting will reset the numbering of the image file-
names. To prevent image files being overwritten, the new counter value will be
based on the highest existing filename number in the camera memory.
Note When a reset option is selected, a dialog box is displayed with more informa-
tion. You can choose to execute the reset action or to cancel.
• Camera information: This submenu displays information about the camera, regulatory
information, and open-source license information. No changes can be made.
#T810539; r. AC/67331/67368; en-US
28
To Next Page
Loading...
Need help?
General
