EasyManuals Logo

FLIR GF320 Getting Started

FLIR GF320
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
3 EN-US English
5.
button (Preview/Save).
The
button has the following functions (not applicable to video clips and
video sequences):
To preview an image before saving it, push and release the button.
To save an image directly, push and hold the button for more than 1
second.
6. A/M button (Auto/Manual).
The A/M button has the following functions:
Push and release the button to change the image adjustment method be-
tween Auto, Manual, and HSM.
Note HSM mode does not apply to the FLIR GF309.
Push and hold down the button for more than 1 second to calibrate the
camera.
Note This is typically not needed during normal operating procedures.
7.
button.
The
button has the following functions:
When an image is in live mode:
To adjust the focus, push the button left/right.
To autofocus, push the center of the
button.
When an image is in preview or saved mode:
To adjust the zoom, push the
button left/right.
8. Hand strap.
9. Focus ring on the infrared lens.
10. Infrared lens.
#T810142; r. AB/55671/55671; mul 9

Other manuals for FLIR GF320

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the FLIR GF320 and is the answer not in the manual?

FLIR GF320 Specifications

General IconGeneral
BrandFLIR
ModelGF320
CategoryThermal cameras
LanguageEnglish

Related product manuals