Need help?Do you have a question about the FLIR Gx320 and is the answer not in the manual?
General| Temperature Range | -20 °C to +600 °C (-4 °F to +1112 °F) |
|---|---|
| Focus | Manual |
| Accuracy | ±2 °C (±3.6 °F) or ±2% of reading |
| Display | 3.5" LCD |
| Field of View | 24° × 18° |
| Field of view (FOV) | 24° × 18° |
| Detector Type | Uncooled VOx Microbolometer |
| Spectral Range | 7.5 – 13 µm |
| Battery Life | Up to 4 hours |
| Operating Temperature | -15 °C to +50 °C (+5 °F to +122 °F) |
| Storage Temperature | -40°C to +70°C |
| Ingress Protection | IP54 |
| Connectivity | USB |
| Supported File Formats | JPEG |
| Weight | 0.88 kg (1.94 lbs) |
Read and understand warnings and cautions in the Safety information publication for safe operation.
Procedure for charging the battery, inserting memory card, and powering on the camera.
Instructions for unlocking FLIR Gx models for hazardous location use with a unique code.
Steps to aim, focus, and identify gas leaks on the camera screen.
Procedure to add a spotmeter and measure temperature on the camera display.
Explanation of how to select different camera modes like Camera, Video, and Gallery.
Accessing and navigating the quick menu for common settings.
Review safety warnings and cautions before operating the camera.
Instructions for installing, removing, and checking the battery level.
Procedures for charging the battery using the charger or in the camera.
Instructions for saving images and recording videos using the Record button.
Importance of correct focus for gas leak detection and temperature measurements.
Adjusting the temperature scale for optimal image contrast and brightness.
Key steps including focus, contrast enhancement, and using HSM for gas leak detection.
Feature for enhancing motion visibility in images for better gas detection.
Step-by-step guide to performing quantification measurements in the field.
Essential steps for accurate temperature measurement including focus and parameters.
Using tools like spots and boxes to measure temperatures on the image.
Setting parameters like emissivity, distance, and atmospheric temperature.
Procedure for saving captured images and previewing them.
Steps to record and save video clips using the camera.
Connecting the camera to Wi-Fi networks or setting it up as an access point.
Steps for preparation, capturing data, and editing inspection points.
Customizing language, units, display, screen brightness, and GPS.
Procedures for cleaning camera housing, cables, and infrared lens.
Steps to check for and install new firmware versions wirelessly.
Using the Windows application to update camera firmware via USB.
Manual procedure for updating camera firmware using a USB cable.
To Next Page
