Camera settings
16
◦ Enable lamp & laser + Use lamp as flash: The camera lamps will flash when an im-
age is saved.
◦ Disable all: Disable the camera lamps, laser, and flash function.
• User interface options:
◦ Auto adjustment region: Set the region used for auto image adjustment. See also
section 7.3.4 Auto adjustment region.
◦ Manual adjustment using touch: Enable/disable the touch functionality for manual
image adjustments. See also section 7.3.2 Manual adjustment by touching the
screen.
◦ Manual adjustment mode: Select the type of manual image adjustment mode (ap-
plicable for the joystick). See also section 7.3.3 Manual adjustment using the
joystick.
◦ Emissivity mode: Select to enter the emissivity by value or material. See also sec-
tion 10.5 Measurement parameters.
◦ Color theme: Select light or dark theme for the user interface.
• Volume: This setting is used to control the volume of the Bluetooth headset speaker.
• Reset options:
◦ Reset default camera mode...: This will affect the image mode, color palette, meas-
urement tools, and measurement parameters. Saved images will not be affected.
◦ Reset device settings to factory default...: This will affect all camera settings, in-
cluding regional settings. Saved videos/images will not be affected. The camera
will be restarted and you will be prompted to set the regional settings.
◦ Reset image counter...: This will reset the numbering of the filenames. The next
number will be based on the highest existing filename number in the image archive.
Note When a reset option is selected, a dialog box is displayed with more informa-
tion. You can choose to execute the reset action or to cancel.
• Camera information: Information about the camera and lens.
• Regulatory: Regulatory information.
#T810605; r. AD/92464/92464; en-US
80
To Next Page
Loading...
Need help?
General
