IDENTIFINDER
®
R200 – Quick Start Guide
Display indicates
percent charged
OVERVIEW
CHARGE BATTERY
identiFINDER R200 SPRD
and replace backup battery
Display
Speaker
Taskbar
Left Right
Center
Power
Center of
Detection
Connection Port
(For Charging & Communication)
TURN IDENTIFINDER R200 OFF
NEED MORE INFO?
KIT CONTENTS
1
2
Access Online Resources: Go to https://flir.pw/r200
Read Operations Manual (PDF): located on USB drive.
02232016
Equipment described herein may require US
Government authorization for export purposes.
Diversion contrary to US law is prohibited.
©2016 FLIR Systems, Inc. All rights reserved.
LED Indicator
Green = Power On
LED Indicator
Red = Alarm
Display and Navigation Buttons
Navigation Buttons correspond to
command icons on Display Taskbar
Flip down port cover and
insert charging cable.
Replace Backup Battery
Rotate counter-clockwise to remove
Backup Battery Door. Remove old CR123A
battery and insert new one. Rotate battery
door clockwise until fully sealed.
Press and hold Power button until
prompted for confirmation.
Select to confirm power off.
P/N DESCRIPTION
4204026 Power Supply; includes US, UK, EU and AU Adaptors
4204015 USB Cable 2.0; type A to mini-B male; 2.0 meters
102001 Wrist Strap Lanyard; 24 inches; black
4203626 Holster
4204014 USB Flash Drive
• Quick Start Guide PDF
• Operations manual PDF
• Software Drivers Installer
In addition to the identiFINDER R200 instrument, the kit
(P/N 4204085) includes the following items:
4.6x6.1_R200_QSG_022216.indd 2-3 2/24/16 4:57 PM
To Next Page
Need help?
General
