Need help?Do you have a question about the FLIR MR60 and is the answer not in the manual?
General| Type | Moisture Meter |
|---|---|
| Warranty | 2 years |
| Display | LCD |
| Battery type | AA |
| Weight | 0.5 lbs |
| Operating temperature | 32°F to 122°F (0°C to 50°C) |
| Storage temperature | -4°F to 140°F (-20°C to 60°C) |
| Relative humidity | 0 to 100% RH |
| Pinless Moisture Measurement Range | 0 to 99.9% |
| Spectral Range | 8 μm to 14 μm |
| Emissivity | Adjustable from 0.1 to 1.0 |
| Resolution | 0.1 |
General instructions to read and follow all safety information before device operation.
Instructions on how to turn the meter on/off and battery charging advice.
Introduction to performing moisture measurements using pin or pinless methods.
Overview of how moisture measurements are taken using internal or external probes.
Step-by-step guide for taking moisture measurements using the external pin probe.
Instructions for taking moisture readings using the integrated pinless sensor.
How to set up and use the audible and visual high moisture alarm feature.
Steps for charging the internal rechargeable battery using the supplied USB charger.
Details of the 2-year limited warranty, including terms, conditions, and exclusions.
To Next Page
