Need help?Do you have a question about the FLIR MR160 and is the answer not in the manual?
General| Type | Electronic hygrometer |
|---|---|
| Purpose | Indoor |
| Placement | Hand |
| Hanger ring | No |
| Thermometer | Yes |
| Product color | Black |
| Humidity measuring range | 0 - 100 % |
| Relative humidity accuracy | 5 % |
| Sustainability certificates | CE |
| Temperature measurement units | F, K, °C |
| Display type | Digital |
| Display diagonal | 2.3 \ |
| Display form factor | Square |
| Power source | Battery |
| Battery type | Li-Ion |
| Battery voltage | 3.7 V |
| Number of batteries supported | 1 |
| Storage temperature (T-T) | -10 - 60 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Package depth | 121 mm |
| Package height | 331 mm |
| Package weight | 910 g |
Weight and Dimensions| Depth | 42 mm |
|---|---|
| Width | 72 mm |
| Height | 140 mm |
| Weight | 300 g |
Essential safety instructions, warnings, and precautions for operating the device.
Specific safety guidelines for the laser pointer, emphasizing eye protection.
Explanation of the function of each button on the MR160 for operation and navigation.
Covers the process of taking moisture measurements using various sensors and modes.
Explains the different display modes for moisture readings (IR+IGM and Moisture-only).
Describes the various imaging modes available for thermal and moisture data display.
Details the different moisture measurement modes: Material Groups, Pin, Pinless, and Set Reference.
Procedure for using the internal pinless sensor to measure moisture content.
Instructions for connecting and using the external pin probe for moisture readings.
How to use the reference mode for comparative moisture measurements.
Explanation of how to use the thermal imaging function and adjust color palettes.
Using the feature to save thermal images with simultaneous pinless moisture readings.
Detailed specifications for internal pinless and external pin-based moisture measurements.
To Next Page
