Need help?Do you have a question about the FLIR MR265 and is the answer not in the manual?
General| Image Frequency | 9 Hz |
|---|---|
| Focus | Fixed |
| Laser Pointer | Yes |
| Power | Rechargeable Li-ion Battery |
| Connectivity | USB, Wi-Fi |
| IR Resolution | 160 x 120 pixels |
| Moisture Measurement Range (Pinless) | 0 to 100% |
| Humidity Range | 0% to 100% RH |
| Operating Temperature | -10°C to 50°C |
| Display | Color LCD |
Details copyright information and restrictions on software and documentation use.
Explains the ISO 9001 certification and FLIR's right to make product changes.
Guides users to the FLIR support website for manuals and notifications.
Advises on environmentally friendly disposal of electronic equipment.
Provides crucial warnings and cautions for safe operation, including laser safety.
Identifies and labels all front, back, and bottom components of the MR265 device.
Details the specific functions of each control button on the MR265.
Explains the various icons and readings visible on the MR265 display.
Explains how to access and navigate through the MR265's menu system.
Lists and describes the six primary icons available in the MR265 main menu.
Details the selection between Automatic (Auto) and Lock scaling for temperature ranges.
Explains different image display modes like Thermal, MSX®, and Digital Camera.
Covers options for viewing measurements like Centre Spot, IGM, and No Measurements.
Details the selection of Pin, Pinless, MR12, and Material Group modes.
Allows selection from five different color palettes for thermal image display.
Covers settings for language, date/time, brightness, alarms, and device resets.
Instructions for turning the MR265 device on and off using the power button.
Explains how to check battery status and connect to an AC charger for charging.
Details how the meter automatically powers off and how to configure this setting.
Information on battery service limitations and long-term storage recommendations.
Explains how moisture measurements are taken using pinless and pin probes.
Describes how moisture readings are presented in different display modes.
Covers IGM Moisture and IGM Custom modes for enhanced scanning and analysis.
Details the selection of Pin, Pinless, MR12, and Material Group modes.
Instructions for using the pinless moisture sensor and its reading interpretation.
Steps for using pin probes, including material groups and reading interpretation.
Instructions for connecting and using the optional MR12 Ball Moisture probe.
Explains how to set and use a reference value for comparative moisture measurements.
How to set up and configure the high moisture alarm with visual and audible alerts.
Guides on using the thermal camera, including image modes and color palettes.
Explains Auto and Lock scaling for adjusting thermal image temperature ranges.
Instructions for capturing and viewing images using the built-in digital camera.
How to configure high and low temperature alarms for thermal imaging.
Instructions on how to take a screen image using the camera button.
How to access the image gallery and view stored images on the MR265.
Methods for deleting individual or multiple images from the device.
How to view detailed information associated with captured images.
Guide for connecting the MR265 to a computer for image transfer.
Step-by-step guide to download and install firmware updates from the FLIR website.
Instructions for cleaning the MR265 housing and optical components.
Information on battery service limitations and long-term storage recommendations.
Guidance on the proper environmentally friendly disposal of the electronic device.
Procedure to recover the MR265 from a frozen or unresponsive state.
Details display, memory, power, and physical characteristics of the MR265.
Specifies resolution, sensitivity, field of view, and temperature range for thermal imaging.
Lists pinless and pin measurement ranges, depth, resolution, and response times.
Details the resolution, focus, and field of view for the digital camera.
Lists relevant safety certifications, environmental standards, and EMC compliance.
Tables correlating timber types and building materials to MR265 group numbers.
Lists common timber names and their corresponding MR265 group numbers.
Provides a table of %WME values based on material wood group number and reading.
States that the product is protected by FLIR's Limited 10-Year Warranty.
Provides links for repair, calibration, technical support, and contact information.
To Next Page
