Moisture Measurement Operation
7
7.9 High Moisture Alarm
1. To access the Alarm mode use the menus (Settings/Measurement Param-
eters/IR Temperature & Moisture Alarm mode). See Section 8.4 for High/
Low IR Temperature Alarm mode.
Figure 7.13 Setting the Moisture Alarm
2. Select the ‘Set Moisture Alarm’ mode.
3. Use the navigation arrows and Select button
to set the Alarm to
‘ABOVE’ or ‘OFF’, to set the max. threshold (0% to 100%), and to select
‘No Sound’ or ‘Beep’ for the alarm alert; the visual alert is always active.
Press Select to confirm and press Return
to exit the menu.
4. When the High Alarm is enabled, the main display will show the alarm bell
icon next to the measurement digits. Refer to Section 5.8 Settings menu
for additional information (Settings/Measurement Parameters/IR Tempera-
ture & Moisture Alarm).
#NAS100070; r. AB/77165/77326; en-GB
35
To Next Page
Loading...
