User Interface Menus
5
Figure 5.14 Selecting the IGM™ Custom mode from the main menu
5.6 Moisture Modes Menu
The Moisture Mode Menu offers five sub-menus as described below.
Figure 5.15 Opening the Moisture Mode menu
• Material Group selection: This mode is only available when the pinless
mode is selected (below). Select Group 1 through Group 11 depending on
the material under test. See Section 13 Appendices for the Material Group
selection tables that help you select the correct group number.
Figure 5.16 Selecting a Material Group for pin-based moisture measurements
#NAS100070; r. AB/77165/77326; en-GB
14
To Next Page
Loading...
