Descriptions
4
4.2 Control Button Descriptions
Long press to power ON or OFF.
Return button. Short press to return to previous screen in Menu.
Long press to switch Worklight ON or OFF.
Press the Select button (centre) to access the Main Menu, to select
items in the menu system, and to see the battery status icon.
Use the outer navigation (ring) buttons to move Up-Down-Left-Right.
Press to switch the Laser pointer ON.
Press to capture screen image.
Press to open image gallery.
4.3 Display Description
Figure 4.2 MR265 Select Display Descriptions
1. Worklight icon
2. Active USB communication icon
3. Battery status icon
4. Moisture reading with sensor type icon
5. Temperature of targeted centre spot (cross hairs)
6. IR Thermal image
7. Cross-hairs (Centre Spot)
8. Low end of IR image temperature range
#NAS100070; r. AB/77165/77326; en-GB
6
To Next Page
Loading...
